Category Archives: Water Heaters

#45 How to ‘Install’ a Water Heater

Published / by Tom Paradise
While the typical water heater has a life expectancy of about Ten Years, mindful consideration of the aspects that pertain to its lifespan can offer the property owner with info about the potential costs that would certainly be incurred by changing the water heater. These factors consist of: correct installation; use quantity; construction quality; as well as maintenance.

Incorrect installation of the hot water heater, or improper gas or water piping connections or insufficient chimney venting on fossil-fuel fired water heaters could result in safety and security issues or leakages as well as very early heating system failing.

Using a lot more hot water raises the task cycle of the water heater as well as reveals the tank to additional danger of corrosion. The temperature level to which the water heater is required to warm the hot water may also be a factor in container or burner or other water heating system component life.


plumbing

A water heater tank is generally a 40- to 80-gallon cauldron that heats and also shops hot water up until it’s needed. As hot water leaves the tank, cool water is piped into the top of the tank. The dip tube networks the water to the base of the storage tank, separated from the kept hot water. The cool water is heated below the container by a gas burner or electric element.

Can a 6-year service warranty hot water heater be made to last longer?

Yes it can. Any type of design will certainly last much longer with proper upkeep, some cheaper versions are offered without a sacrificial anode rod. An anode rod (aluminum-magnesium alloy) helps to maintain your container from rusting out. Electro magnetic current constantly present when water is warmed, this magnetic existing eats steel like a cancer cells, nevertheless it will certainly attack the sacrificial anode pole initially and not your steel water storage tank, getting durability.

After the installation of the new 50 gallon power vented water heater.

Published / by Tom Paradise
While the normal hot water heater has a life expectancy of regarding One Decade, mindful factor to consider of the variables that refer to its lifespan can provide the house owner with info about the possible expenses that would be incurred by replacing the water heater. These variables include: appropriate installation; usage volume; building and construction high quality; and also upkeep.

Inappropriate setup of the water heater, or inappropriate gas or water piping connections or poor chimney venting on fossil-fuel fired water heaters can cause safety issues or leakages and also very early heating unit failing.

Using much more warm water raises the obligation cycle of the water heater as well as reveals the storage tank to extra threat of corrosion. The temperature to which the hot water heater is required to heat up the warm water might also be a factor in container or burner or various other hot water heater part life. The quantity of warm water utilized, which figures out just how difficult it functions, is called the obligation cycle or level of usage of the hot water heater (more usage = much shorter life).

Hot water heater essentials

A water heating system container is primarily a 40- to 80-gallon cauldron that heats and also stores hot water up until it’s required. As hot water leaves the container, chilly water is piped right into the top of the storage tank.

An anode rod (aluminum-magnesium alloy) aids to maintain your storage tank from rusting out. Electro magnetic present always present when water is heated, this magnetic existing consumes steel like a cancer, nevertheless it will strike the sacrificial anode pole first and also not your steel water storage tank, getting long life.

Installing a Rheem Prestige Series Condensing Tankless Water Heater

Published / by Tom Paradise
While the common hot water heater has a life expectancy of about 10 years, careful consideration of the aspects that pertain to its life expectancy can give the house owner with details about the possible prices that would certainly be incurred by changing the water heater. These variables include: right installment; usage volume; building and construction quality; and upkeep.

Improper installment of the water heater, or improper gas or water piping connections or inadequate smokeshaft venting on fossil-fuel fired hot water heater can result in safety issues or leaks as well as very early heating unit failing.

Using extra warm water increases the task cycle of the water heater and reveals the tank to added risk of deterioration. The temperature level to which the water heating unit is needed to warm the warm water might additionally be an element in storage tank or burner or other water heater part life.

A water heater tank is essentially a 40- to 80-gallon cauldron that warms and also stores hot water till it’s required. As hot water leaves the container, cool water is piped right into the top of the storage tank.

An anode rod (aluminum-magnesium alloy) helps to keep your container from rusting out. Electro magnetic current constantly existing when water is heated, this magnetic current eats steel like a cancer, however it will strike the sacrificial anode pole first as well as not your steel water tank, purchasing long life.

Hot Water Heater Installation Tips – Use SharkBites !!!

Published / by Tom Paradise
While the common water heater has a life expectancy of about One Decade, mindful consideration of the factors that concern its life-span could give the homeowner with information concerning the potential expenses that would be sustained by changing the water heater. These aspects consist of: correct installation; usage quantity; construction quality; and maintenance.

Inappropriate installation of the hot water heater, or incorrect gas or water piping links or inadequate chimney ducting on fossil-fuel discharged hot water heater could result in safety and security troubles or leakages and also early heater failure.

Using extra hot water increases the responsibility cycle of the water heating system as well as exposes the storage tank to extra threat of corrosion. The temperature to which the water heating unit is required to heat up the warm water may additionally be an aspect in storage tank or burner or various other water heating unit part life.

A hot water heater tank is generally a 40- to 80-gallon cauldron that warms as well as shops hot water up until it’s required. As warm water leaves the storage tank, cool water is piped right into the top of the storage tank. The dip tube networks the water to the base of the storage tank, divided from the kept warm water. The chilly water is warmed at the bottom of the container by a gas burner or electrical element.

Can a 6-year service warranty hot water heater be made to last longer?

Yes it can. Any type of model will last much longer with appropriate maintenance, some cheaper models are offered without a sacrificial anode pole. An anode pole (aluminum-magnesium alloy) helps to keep your tank from rusting out. Electro magnetic current constantly existing when water is heated, this magnetic present eats steel like a cancer, nevertheless it will strike the sacrificial anode rod first as well as not your steel water container, acquiring longevity.

EcoSmart Eco 8 Electric Tankless Water Heater Installation and Review

Published / by Tom Paradise



We installed and EcoSmart Eco 8 Tankless Water Heater for a utility sink as part of our woodworking shop project. Thought we might share some information about it if folks are considering buying this unit. If you’re interested in seeing the whole project check out the link below for that series. Links to the three products used in this video are also below. +AMDG

This Old Quonset Hut series: https://www.youtube.com/playlist?list=PLTvn-s3xSRWQtNQyrSotEnJ8JPJto8QbE

EcoSmart Eco 8 Tankless Water Heater: https://www.amazon.com/EcoSmart-Electric-Tankless-Modulating-Technology/dp/B00529DDUI/ref=sr_1_1?

3m Aqua Pure Scale Inhibitor System: https://www.amazon.com/Aqua-Pure-AP430SS-Water-System-Protector/dp/B000NKETXQ/ref=pd_bxgy_60_img_2?_encoding=UTF8&psc=1&refRID=P5Z161W2JK2BF6MZBDTE

Webstone Tankless Water Heater Service Valve Kit: https://www.amazon.com/Webstone-44443WPR-Isolator-Tankless-Construction/dp/B005Q5LXY6/ref=pd_bxgy_328_img_2?_encoding=UTF8&psc=1&refRID=B6V92TW03PRFFF0C8T28

Tankless Water Heater 3 Things to Know

Published / by Tom Paradise
While the typical hot water heater has a life-span of regarding 10 years, cautious factor to consider of the aspects that pertain to its life expectancy could offer the property owner with details about the possible costs that would be incurred by changing the water heater. These factors include: appropriate installation; usage quantity; building and construction high quality; and maintenance.

Inappropriate setup of the water heater, or incorrect fuel or water piping connections or insufficient chimney ducting on fossil-fuel terminated hot water heater could result in safety and security issues or leakages as well as very early heating system failure.

Utilizing extra hot water raises the responsibility cycle of the water heating unit and also reveals the container to additional threat of deterioration. The temperature level to which the water heating system is needed to heat up the warm water might additionally be a variable in container or burner or other water heating unit component life.

A water heating unit container is essentially a 40- to 80-gallon cauldron that heats and stores warm water until it’s required. As hot water leaves the container, cool water is piped into the top of the tank.

Yes it can. Any model will last much longer with appropriate maintenance, some less expensive versions are sold without a sacrificial anode pole. An anode rod (aluminum-magnesium alloy) assists to maintain your storage tank from rusting out. Electro magnetic present always present when water is heated up, this magnetic existing eats steel like a cancer cells, nonetheless it will attack the sacrificial anode pole initially and not your steel water storage tank, buying long life.

How to Replace a Tank Water Heater

Published / by Tom Paradise
While the normal water heater has a lifespan of regarding One Decade, mindful consideration of the aspects that refer to its life-span can give the homeowner with info regarding the prospective expenses that would be sustained by changing the hot water heater. These aspects consist of: appropriate installment; usage quantity; construction high quality; and also maintenance.

Incorrect installment of the hot water heater, or improper fuel or water piping links or insufficient smokeshaft airing vent on fossil-fuel discharged hot water heater could lead to safety and security problems or leaks and also early heating system failure.

Using a lot more hot water increases the task cycle of the water heater and also subjects the container to extra threat of deterioration. The temperature to which the water heating system is required to heat the hot water could also be an element in storage tank or burner or various other water heating unit component life.

A water heating system storage tank is basically a 40- to 80-gallon cauldron that warms as well as stores warm water till it’s needed. As hot water leaves the container, cold water is piped right into the top of the tank.

An anode rod (aluminum-magnesium alloy) assists to keep your tank from rusting out. Electro magnetic current always existing when water is heated up, this magnetic present eats steel like a cancer cells, nonetheless it will certainly attack the sacrificial anode pole initially and not your steel water tank, acquiring long life.

How to Install an Indirect Water Heater on a Boiler

Published / by Tom Paradise



Watch the full episode: https://www.thisoldhouse.com/watch/ask-toh-nasa-simulated-panels

Ask This Old House plumbing and heating expert Richard Trethewey helps a homeowner install an indirect water heater onto an existing steam boiler to boost the amount of hot water in the house.

Click here to SUBSCRIBE to the official This Old House YouTube channel: http://www.youtube.com/subscription_center?add_user=thisoldhouse

Time:
5-6 hours

Cost:
00

Skill Level:
Difficult

Tools List:
Hose
Water pump
Level
Propane torch
Pipe cutter
Adjustable wrench
Pipe wrench pliers

Shopping List:
1” copper pipe
½” copper pipe
Y-Strainer
Ball valves
Shut off valves
Circulator Pump
Thermostatic mixing valve
Relief valve
Water temperature sensor
Sensor relay
Solder
Shims
Sand cloth
Pipe dope

Steps:
1. Turn off the main power switch on the boiler and the main water supply to the boiler.
2. Hook up a hose and water pump to the boiler’s draw off valve to drain down the water in the boiler. If possible, pump the water into a utility sink or extend the hose outdoors.
3. Find a spot for the new water heater. Use shims and a level to make sure it is sturdy and level.
4. Find a workable place to tap into the boiler to connect the boiler to the indirect water heater via the heat exchanger coil- preferably just below the water line to avoid any potential for sludge near the bottom of the boiler.
5. Dry fit 1” copper pipe connections from boiler to the heat exchanger coil input. Be sure to place a ball valve shut off at the tap point. Place a Y-Strainer after the ball valve to act as a filter and flush point. Use appropriate adapter pipe fittings, pipe dope and plumber’s tape to connect piping. Make sure all connections are level.
6. Before soldering any copper pipes, be sure to use sand cloth and flux on all the connections.
7. Solder the connections with solder and a propane torch.
8. Break the connection to the boiler draw off valve. This input will now serve as the return for the heat exchanger coil and a draw off.
9. Dry fit 1” copper pipe connections from the heat exchanger coil output to the input of the boiler. The pipe run should include a circulator pump, a purge valve, shut off ball valve and a second purge valve in that order.
10. Solder the connections with solder and a propane torch.
11. Break the connection to the main water supply into the boiler using a pipe cutter. Be sure to have a bucket ready to catch any excess water.
12. Dry fit ½” copper pipe connections from the main water supply to the cold water input at the bottom of the indirect water heater. Use appropriate adapter pipe fittings, pipe dope and plumber’s tape to connect piping. The pipe run should include a tee coupling to reconnect the new run to the boiler. Include a shut off valve after the coupling into the boiler. Extend piping off the middle portion of the tee coupling. Pipe should extend to the indirect water heater and include a draw off valve at the cold input. Additional pipe should also be connected to the thermostatic mixing valve.
13. Break the connection from the boiler to the main hot water feed into the home using a pipe cutter.
14. Dry fit the ½” copper pipe connections from the output on top of the indirect water heater. The pipe run should feed to a relief valve, the thermostatic mixing valve and connect to the main hot water feed into the home.
15. Solder the connections with solder and a propane torch.
16. Attach a temperature sensor to the indirect water heater.
17. Attach an electronic relay to the boiler.
18. Make the electrical connections from the temperature sensor to the relay on the boiler and the circulator pump.
19. Turn the main power switch on the boiler back on.
20. Turn the water supply valve back on.
21. Use the purge valves to eliminate any excess air in the system. You’ll need a bucket to catch the water.
22. It will take some time for the water heater tank to fill and heat up.

Follow This Old House and Ask This Old House:
Facebook: https://www.facebook.com/ThisOldHouse
Twitter: https://twitter.com/thisoldhouse

Pinterest: http://www.pinterest.com/thisoldhouse/
G+: https://plus.google.com/+thisoldhouse/posts
Instagram: http://instagram.com/thisoldhouse
Tumblr: http://thisoldhouse.tumblr.com/